Tube/Twin/Canopy FansDemand Control Ventilation Domestic FansCommercial FansIndustrial FansDomestic Vent & Heat RecoveryAir Handling & Heat Recovery UnitsPlastic Ducting & AncillariesGrilles & DiffusersChilled BeamsFire / Smoke Dampers & VCD'sDuct Heaters & CoolersUnit Heaters & DehumidifiersAir Curtains LPHW & ElectricFan Coils UnitsVAV's & CAV'sFume Extract UnitsSilencersControlsCooker Hoods

Axial

HEP - Axial Fan

Fan:

- Sheet steel support frame.
- Rolled steel-sheet long housing. (HEPT).
- External connection box, IP-65 protection. (HEPT).
- Motor support with safety guard, in compliance with DIN 24167 and UNE 20-359-74 standards.
- Polyamide 6 fibreglass-reinforced impeller; dynamically balanced in compliance with ISO 1940 standard.
- Anticorrosive finish in polyester resin, polymerised at 180ºC, after degreasing, phosphating and passivation pre-treatment.
- Supplied with connection box or without box on demand. (HEP)

Motor:

- Asynchronous motors, with squirrel-cage rotor.
- Standard motors supplied with three-phase 220-240/380-
415 V 50 Hz and single-phase 220-240 V, 50 Hz motor.
- Class F insulation and IP65 protection.
- Standard models can operate at temperatures between -25ºC +60ºC 4-6 and 8 Pole motors, and -25ºC +45ºC 2 pole motors.

Thermal protection

- All motors are fitted with thermal protection (Klixon) to avoid overheating produced by any type of anomaly.